Zhangzhou, FujianTier A
Minfa Aluminum
Tier-A architectural systems supplier based in Zhangzhou, Fujian, founded 1992.
✓ Thermal breakanodizedpowder-coatedwood-grainmill🌏 US🌏 EU🌏 JP🌏 KR🌏 VN🌏 AU🌏 NZ🌏 AE
RFQ summary
- Status
- Open
- Best fit
- Window profiles
- Export markets
- 8 markets
- Refreshed
- 2026-06-21
- Buyer fills
- Qty, port, finish, certs
No phone, email or raw source URL is shown on the public page.
Product range
Key product lines compiled from official-site evidence + SAMR business scope — to size up the mill before contacting. Full catalogues are requested via RFQ, not listed here.
| Product | Alloy | Series | Spec / selling point | Application |
|---|---|---|---|---|
| MF 75 series system window | 6063 | 75 | PA66-GF25 thermal break · 75 series window | Architectural profile |
| MF 55 series window/door profile | 6063 | 55 | GB/T 5237 · wall thickness 2.0mm · 55 series | Architectural profile |
| MF curtain wall structural mullion | 6063A | — | High wind-pressure curtain-wall mullion | Curtain wall cladding |
| Series 80 Sliding Window/Door | — | — | 80-system single sliding window; frame width 78.5 mm nominal; wall thickness 1.4 mm; profiles include top rail MF80102, bottom rail MF80103 | Architectural profile |
| Series 38 Casement Window/Door | — | — | 38-system casement window/door; outer frame 96 mm wide, sub-frame 49.5 mm; profiles include sash MF3866, mullion MF3880 66 mm | Architectural profile |
| Series 50 Casement Window/Door | — | — | 46-system floor-spring door; frame section MF4601 51 mm, middle rail MF4606; node-detail drawing shown | Architectural profile |
| Series 46 Casement Window/Door | — | — | 46-system floor-spring door sections; upper frame MF4601 51 mm, lower frame MF4602 80 mm, middle rail MF4608 90 mm | Architectural profile |
| Series 71 Casement Window/Door | — | — | — | Architectural profile |
| Series J82 Thermal Break Window/Door (Injection-filled) | — | — | J82 injection thermal-break sliding window; middle fixed section MFJ8213 86.6 mm; corner bracket MFJ8224 90.6 mm; thermal-break weight not included | Architectural profile |
| Series J86 Thermal Break Window/Door (Injection-filled) | — | — | J86 injection thermal-break sliding window; single-track panel MFJ8625 84.4 mm; upper fixed MFJ8627 82.6 mm; corner MFJ8626 86 mm | Architectural profile |
| Series 36 Aluminum Railing | — | — | 36-series railing; main post MF36152 70 mm, MF36153 40 mm; handrail MF36186 100 mm; side post MF36192 55 mm | Architectural profile |
| Aluminum Louver/Venetian Blind Profiles | — | — | — | Architectural profile |
| Series G80/G80A/G80B Anti-theft Thermal Break Window/Door (Strip-inserted) | — | — | G80 strip-inserted thermal-break sliding window/door; thermal-break strip length 10 mm; corner MFG8021 78.5 mm, mullion MFG8060 75 mm; corner MFG8070 94.8 mm | Architectural profile |
| ZhiLu German-style Premium System Windows and Doors | — | — | — | Architectural profile |
| ZhiLu Aluminum Sunroom | — | — | — | Architectural profile |
| Series 868 Sliding Window/Door | — | — | 868-system sealed sliding door/window profiles; key sections: header MF8619, sash MF8611, bottom rail MF8602 | Architectural profile |
| Series 2010 Sliding Window/Door | 2010 | — | — | Architectural profile |
| MF aluminum formwork plate | 6061 | — | Reusable concrete-pouring formwork | Industrial profiles |
| Square Tube Column Profiles | — | — | — | Curtain wall cladding |
| Unitized Curtain Wall Section Profiles | — | — | — | Curtain wall cladding |
| Series 100 Curtain Wall Profiles | — | — | 100-series curtain wall; main transom MF10003 55 mm wide × 100 mm deep; mullion cross 72 mm; glass-pressure plate MF10032 100 mm deep | Curtain wall cladding |
| Series 110 Curtain Wall Profiles | — | — | 110-series curtain wall; main transom MF11024 102.3 mm wide × 55 mm, mullion 65 mm; glass-cap 65 mm; system depth 110 mm | Curtain wall cladding |
| Series 120 Curtain Wall Profiles | — | — | — | Curtain wall cladding |
| Series 150 Curtain Wall Profiles | — | — | — | Curtain wall cladding |
| Series 200 Curtain Wall Profiles | — | — | — | Curtain wall cladding |
| Series 250 Curtain Wall Profiles | — | — | — | Curtain wall cladding |
| Minfa Curtain Wall Operable Vent Section Profiles | — | — | — | Curtain wall cladding |
| Minfa Curtain Wall Glass Frame Section Profiles | — | — | — | Curtain wall cladding |
| Minfa Series G130 Thermal Break Curtain Wall (Strip-inserted) | — | — | G130 strip-inserted thermal-break curtain wall; main transom MF1329 70 mm wide × 95 mm deep; outer frame MF16523 76.87 mm wide × 95 mm deep; 3 mm thermal zone | Curtain wall cladding |
| Minfa Series G160 Thermal Break Curtain Wall (Strip-inserted) | — | — | — | Curtain wall cladding |
| Aluminum Profiles for Luggage and Bags | — | — | — | Industrial profiles |
| Open Channel, Corner Tube and Desktop Tube Profiles | — | — | — | Industrial profiles |
| Aluminum Profiles for Scooters, Ladders and Hydrants | — | — | — | Industrial profiles |
| Decorative and Stationery Aluminum Profiles | — | — | — | Industrial profiles |
| Aluminum Heat Sink Profiles | — | — | — | Industrial profiles |
| MF industrial extrusion 6005A-T5 | 6005A | — | T5/T6 general industrial profile | Industrial profiles |
| Aluminum Single-skin Cladding Panel | — | — | — | Curtain wall cladding |
| Aluminum Formwork for Construction | — | — | — | Industrial profiles |
| Minfa Series G110 Thermal Break Curtain Wall (Strip-inserted) | — | — | G110 strip-inserted thermal-break curtain wall; main transom MFG1123 117 mm wide × 70 mm deep; wing transom MFG1110 91.5 mm wide × 60 mm | Curtain wall cladding |
| Minfa Series G120 Thermal Break Curtain Wall (Strip-inserted) | — | — | G120 strip-inserted thermal-break curtain wall; transom MFG1201 120 mm wide × 65 mm deep; MFG1202 120 mm × 50 mm; combination MFG1203 120 mm × 60 mm with 52.6 mm wing | Curtain wall cladding |
| General Industrial Aluminum Profiles | — | — | — | Industrial profiles |
| Aluminum Materials for 5G Base Station Construction | — | — | — | Industrial profiles |
| ZhiLu All-Aluminum Home Furniture | — | — | — | Other aluminum products |
| Minfa Series G140 Thermal Break Curtain Wall (Strip-inserted) | — | — | G140-series profiles; horizontal MFG14003 70 mm × 32 mm; box section MFG14014 60 mm × 60 mm; pressure cap MFG14011 100 mm wide | Curtain wall cladding |
| Minfa Series G150 Thermal Break Curtain Wall (Strip-inserted) | — | — | G150 strip-inserted thermal-break curtain wall; main transom MFG1508 113 mm wide × 72 mm deep; cap MFG1506 77.4 mm; cill MFG1509 103 mm × 62.9 mm | Curtain wall cladding |
Commercial terms
- MOQ
- 500 kg
- Lead time
- Tooling 15-20 days · bulk 25-30 days
- OEM / ODM
- ✓ OEM✓ ODM
Certifications
Self-declared; document scans pending independent check.
GB/T 5237
GB/T 28289
Factory & credentials
Standards compatibility
GB/T 5237GB/T 5237.6EN 14351GB/T 21086GB/T 23443
Industry-applicable standards for this product category — not a certification claim.Browse by product category
Trust checks & RFQ scope
Identity
verifiedNo identity hold
Identity check has been recorded against the supplier's own site.Products
readyProduct rows on file
Product evidence has cleared review.Certificates
pendingCertificates not independently checked
Ask via RFQ to receive current certificate copies directly from the supplier.Registered Chinese name (click to show)
Chinese legal name: 福建省闽发铝业股份有限公司
Legal representative (Chinese): 江宇
USCC: 913500001563372595
Customs & shipment records
Real bill-of-lading shipments (destination, HS, frequency) from public customs sources — to be added.
Shipment records coming soon
Business registry
Public SAMR registry fields — verify at gsxt.gov.cn before contracting.
Unified Social Credit Code (USCC)
913500001563372595
Legal representative
Jiang Yu
Registered capital
RMB 939 million
Founded
1992
Registered address
Lijiang High-tech Park, Licheng District, Quanzhou City, Fujian ProvinceView on map ↗
Business scope
R&D, production and sales of aluminum alloy extrusions; R&D, production and sales of building aluminum formwork; metal processing machinery manufacturing; import and export of goods and technology.
Translated from the official Chinese SAMR filing.
HS codes
760421760429761010
Sourced from China SAMR (gsxt.gov.cn) via Aiqicha / Qichacha public bulk APIs. · Verify on GSXT ↗
Evidence sources
Sources behind this preview. Request a fresh ISO / MTC / export record copy from the mill before contracting.
✓ 002578-annual-report✓ szse-filings✓ xueqiu
Contact
Reach this supplier through editorial
We route inquiries through Aluminum China editorial — not a broker, no commission. Leave your email and we'll connect you with the right sourcing channel for Minfa Aluminum.
No spam. One email to confirm receipt. Unsubscribe any time.